Every RIPSPEC injector kit is matched to engine codes, because the engine code decides which seals, washers and bolts your engine takes. Find your code below. Codes with a link have their own page showing the parts, the cars and the look-alike engines to watch for.
Your engine code is on the vehicle data sticker in the service book or spare wheel well, or on the engine cover label. Any parts supplier can also read it from your registration. See fitment help, or use the part finder on our home page if you know your car but not the code.
Can't find your code, or not sure? Send us your registration or VIN and we will tell you the right kit before you order.
2.0 TDI common rail with clamp bolts (EA189)
Injector 03L130277J or 03L130277Q. Seals kit: body O-ring WHT000884, copper washer 059130519 and return line O-ring WHT005302, four of each. The seal and bolt kit adds two clamp bolts WHT004739.
CFFA, CFFB, CFGB, CFGC, CFHB, CFHC, CFHE, CFHF, CFJA, CGLA, CGLB, CGLC, CGLD, CGLE, CJCA, CJCB, CJCC, CJCD, CLCA, CLCB, CLLA, CMFA, CMFB, CMGA, CMGB.
Parts explained: WHT005302 return line O-ring and WHT004739 clamp bolt. Bolts on their own: WHT004739 clamp bolt pair.
2.0 TDI common rail with tensioning plates (earlier EA189, from 2008)
No clamp bolt: the injectors are held by plates and nuts. Seals kit: WHT000884, 059130519 and a different return line O-ring, WHT007480A, four of each.
CAGA, CAGB, CAGC, CAHA, CAHB, CBAA, CBAB, CBAC, CBBB, CBDA, CBDB, CBDC, CBEA, CEGA, CJAA, CMEA. CBDA and CBEA are matched by engine family rather than read from a VW drawing, so ask us to confirm.
- Plate-type seal kit for VW Golf VI, Passat B6, Tiguan, Audi A3, Skoda and SEAT
- Plate-type seal kit for Audi A4 B8, A5, Q5, A6 C6 and SEAT Exeo
EA288 1.6 and 2.0 TDI, and 2.0 TDI EA288 evo
Seals kit: WHT000884, 059130519 and return line O-ring WHT006497A, four of each. It fits every Bosch-injector EA288 four-cylinder engine and the later 05L EA288 evo engines. The seal and bolt kit adds two clamp bolts WHT005478 and fits 04L injectors only, so 05L evo engines take the seals kit.
CKFB, CKFC, CLHA, CLHB, CNHA, CNHC, CRBB, CRBC, CRBD, CRFA, CRFC, CRFD, CRGA, CRGB, CRKA, CRKB, CRLB, CRLC, CRLD, CRMB, CRUA, CRVA, CRVC, CRVD, CSUA, CSUB, CSUD, CSUE, CUNA, CUPA, CUUA, CUUB, CUUD, CUUE, CUUF, CUVA, CUVB, CUVC, CUVD, CUWA, CUXA, CVCA, CXMA, CXXA, CXXB, CYKA, CYKB, CYKC, CYLA, CZHA, CZJA, DBBA, DBGA, DBGB, DBGC, DBKA, DCXA, DCYA, DCYB, DCZA, DDAA, DDCA, DDCB, DDDA, DDYA, DDYB, DEJA, DEJB, DEKA, DELA, DESA, DETA, DETB, DEUA, DEUB, DEUC, DEZB, DEZD, DEZE, DEZF, DFBA, DFCA, DFEA, DFEB, DFFA, DFGA, DFGB, DFGC, DFHA, DFLA, DFLD, DFMA, DFSA, DFSB, DFSC, DFSD, DFSE, DFSF, DFTA, DFTB, DFTC, DFUA, DFVA, DGCA, DGDA, DGDB, DGMA, DJGA, DLTA, DLTC, DLUB, DSRA (seals kit only), DSRB (seals kit only), DSTB (seals kit only), DSUD (seals kit only), DTNA (seals kit only), DTNB (seals kit only), DTPA (seals kit only), DTPB (seals kit only), DTRA (seals kit only), DTRB (seals kit only), DTRC (seals kit only), DTRD (seals kit only), DTRE (seals kit only), DTRF (seals kit only), DTSA (seals kit only), DTSB (seals kit only), DTTA (seals kit only), DTTC (seals kit only), DTUA (seals kit only), DXNB (seals kit only), DXPA (seals kit only), DXPB (seals kit only), DXRA (seals kit only), DXRB (seals kit only), DXRC (seals kit only), DXRD (seals kit only).
Check the injector: some 1.6 TDI engines (CLHA, CLHB, CRKA, CRKB, CXXA, CXXB, DBKA, DDYA, DDYB) were built with either Bosch or Delphi injectors. Bosch injectors take this kit; Delphi injectors take different parts. The 1.6 TDI in the Audi Q2, VW T-Roc, Skoda Karoq and SEAT Ateca (Delphi), the DGT engine codes, the BiTDI and the T6 and Crafter engines are not covered.
Seals only:
- VW Golf 7 and 8, Golf Sportsvan, Touran, Caddy, T-Roc, Beetle, Jetta and Scirocco
- VW Passat, CC, Arteon, Tiguan, Sharan and SEAT Alhambra
- Audi A3 8V and 8Y, Q2, Q3, TT and A1
- Audi A4 B8 and B9, A5, A6 C7 and C8, A7 and Q5
- Skoda Octavia, Superb, Kodiaq, Karoq and SEAT Leon, Ateca, Tarraco
Seals and bolts:
- VW Golf 7, Golf Sportsvan, Touran, Caddy, T-Roc, Beetle, Jetta and Scirocco
- VW Passat, CC, Arteon, Tiguan, Sharan and SEAT Alhambra
- Audi A3 8V, Q2, Q3, TT and A1
- Audi A4 B8 and B9, A5, A6 C7 and C8, A7 and Q5
- Skoda Octavia, Superb, Kodiaq, Karoq and SEAT Leon, Ateca, Tarraco
Bolts on their own: WHT005478 clamp bolt pair or WHT005490 clamp bolt pair.
3.0 TDI V6 (Audi, Porsche)
Six injectors, so six of each part: WHT000884, copper washer 059130519B and return line O-ring WHT007480A.
CDTA, CDTB, CDTC, CDUC, CDUD, CGQB, CJGA, CJGC, CJMA, CKVB, CKVC, CLAA, CLAB, CLZB, CMHA, CNRB, CPNA, CPNB, CRCA, CRCB, CRTC, CRTD, CRTE, CRTF, CSWB, CTBA, CTBB, CTBC, CTBD, CTCB, CTCC, CVUA, CVUB, CVUC, CVVA, CVVB, CVVC, CZVA, CZVB, CZVC, CZVD, CZVE, CZVF, DEHA.
Not covered: VW Touareg 7P, Audi Q7 4M, the A5 8T CKVD, the Amarok V6 and the Porsche Macan, and the later A4 B9 and A5 F5 engines DCPC, DCPE and DEWB, which use a different washer. On the A4 B9 and A5 F5 the kit fits CSWB and CRTC only.
- Audi A4 B8, A4 Allroad, A5 and Q5
- Audi A4 B9, A4 Allroad B9 and A5 F5
- Audi A6 C7, A6 Allroad and A7 (2011 to 2018)
- Audi A8 D4
- Audi Q7 4L (2010 to 2015)
- Porsche Cayenne 92A
Ford 1.0 and 1.6 EcoBoost, Volvo 1.6 GTDi
Seals and clips to Ford kit CM5G-9U509-AA (Volvo 31375050). Not for the 1.5 or 2.0 EcoBoost, the Puma, the Focus Mk4, or 1.0 engines coded B3, B7, BZ, M0 or R0.
1.0 EcoBoost (3 injectors): M1CA, M1CB, M1DA, M1DC, M1DD, M1DH, M1JA, M1JC, M1JE, M1JH, M1JJ, M1JL, M1JM, M1JP, M1JU, M2DA, M2DB, M2DC, M2GA, M2GB, Q0JA, Q0JB, Q0JC, Q0JD, SFCA, SFCB, SFCC, SFCD, SFCE, SFCF, SFDA, SFDB, SFJA, SFJB, SFJC, SFJD, SFJE, SFJF, SFJH, SFJJ, SFJK, SFJL, SFJN, SFJP, Y7JA, YYJA, YYJB, YYJC, YYJD, YYJE, YYJF, YYJG.
1.6 EcoBoost (4 injectors): JQDA, JQDB, JQGA, JQMA, JQMB, JTBA, JTBB, JTDA, JTDB, JTJA, JTJB, JTJC, JTMA, JTWA, JTWB, YUDA, and Volvo B4164T (T2, T3, T4).
- 1.0: Ford Fiesta Mk7 and Mk8, B-MAX, EcoSport and Courier
- 1.0: Ford Focus Mk3, C-MAX, Mondeo Mk5 and Transit Connect
- 1.6: Ford Fiesta ST Mk7 ST180 and ST200
- 1.6: Ford Focus Mk3, Kuga Mk2, C-MAX, Mondeo Mk4 and S-MAX
- 1.6: Volvo V40, S60, V60, V70 and S80 T3 and T4
Ask us first
- VW Crafter 2.0 TDI (CKTB, CKTC, CKUB, CKUC, CSLA, CSLB, CSLC, CSNA): the clamp bolt is always WHT004739 (bolt pair), but the return line seal depends on the PR code. Send us your VIN.
- VW Amarok 2.0 TDI (CNEA, CNFA, CNFB, CSHA): VW built two versions under the same codes, so only the VIN can tell which parts it takes.
- Three-letter codes such as BKD, BMN or AZV are the older pumpe-duse 2.0 TDI. We do not stock parts for these.
- 1.6 TDI EA189 (CAYB, CAYC and others): not on the shop yet. Ask us.
Fitment checked against manufacturer parts illustrations, October 2026.