WHT004739 is the injector clamp bolt on VW Group 2.0 TDI common rail (EA189) engines. Each bolt holds one clamp, and each clamp holds down two injectors, so there are two bolts per engine.
At a glance
| VW part number | WHT004739 |
| What it is | Injector clamp bolt, M6 x 88, inner multipoint head |
| Per engine | 2 |
| Fitted with | Clamp 03L130216A or 04L130216 (not included in our kits) |
Engines that use WHT004739
Every 2.0 TDI EA189 engine fitted with VW injector 03L130277J or 03L130277Q:
CFFA, CFFB, CFGB, CFGC, CFHB, CFHC, CFHE, CFHF, CFJA, CGLA, CGLB, CGLC, CGLD, CGLE, CJCA, CJCB, CJCC, CJCD, CLCA, CLCB, CLLA, CMFA, CMFB, CMGA, CMGB.
VW Crafter 2.0 TDI (CKTB, CKTC, CKUB, CKUC, CSLA, CSLB, CSLC, CSNA): the bolt is WHT004739 on every version, even though the small return line seal changes with the PR code.
Do not confuse it with
- WHT003187, M6 x 70.2: 1.6 TDI EA189 engines, and 2.0 TDI EA189 engines with the earlier 03L130277C injector (such as the Amarok).
- WHT005478, M6 x 105: most EA288 2.0 and 1.6 TDI engines.
- WHT005490, M6 x 90: some EA288 engines, and the 2.0 TDI in the T6 and the later Crafter.
- WHT004923B: 3.0 TDI V6 engines with clamp bolts, one per injector.
- No bolt at all: the 2008 to 2010 plate-type 2.0 TDI engines (CBAB, CBDB, CAHA and others) and CJAA hold the injectors with tensioning plates and nuts.
Buy
- Pair of WHT004739 injector clamp bolts
- Seal and bolt kit with bolts, O-rings and washers for all four injectors: VW Golf, Jetta, Eos and Beetle, Passat B7 and CC, Caddy, Audi A4 B8 and more. Or find your engine on CFFB, CFHC or CGLC.
Checked against Volkswagen Group parts illustrations, October 2026. RIPSPEC parts are replacements for the VW part number shown.