Engine code CFFA is the 136 PS 2.0 TDI common rail engine (VW Group EA189). This page shows exactly which injector seals, washers and clamp bolts it takes, checked against the VW Passat B7 and Golf VI parts illustrations.
At a glance
| Engine code | CFFA |
| Engine | 2.0 TDI common rail, EA189 |
| Power | 136 PS |
| Injector (VW number) | 03L130277J, or its replacement 03L130277Q (exchange units such as 855CX use the same parts) |
| Injectors | 4 |
| RIPSPEC kit | Kit 1 for 2.0 TDI EA189, seals only or seals and bolts. Pick your model below. |
What a CFFA engine takes
Quantities are for a full set of four injectors. Every RIPSPEC kit covers all four.
| Part | Replaces VW | Per engine | Seals kit | Seal and bolt kit |
|---|---|---|---|---|
| Injector body O-ring, VW size 16.2 x 1.5 mm | WHT000884 | 4 | Yes | Yes |
| Copper sealing washer | 059130519 | 4 | Yes | Yes |
| Return line O-ring, VW size 3.5 x 1.25 mm | WHT005302 | 4 | Yes | Yes |
| Injector clamp bolt, M6 x 88, multipoint head | WHT004739 | 2 | No | Yes |
| Injector clamp | Reuse your existing clamps | 2 | No | No |
Choose the seal and bolt kit if your clamp bolts are corroded, damaged or you would rather fit new ones. The clamps themselves are not included.
Cars with the CFFA engine
Many of these models were also built with other engines, so check your engine code matches before you order.
| Make | Model | Versions |
|---|---|---|
| Audi | A3 (8P1) | 2.0 TDI 136 PS |
| Audi | A3 Convertible (8P7) | 2.0 TDI 136 PS |
| Audi | A3 Sportback (8PA) | 2.0 TDI 136 PS |
| Audi | Q3 (8UB, 8UG) | 2.0 TDI 136 PS |
| SEAT | Alhambra (710, 711) | 2.0 TDI 136 PS |
| VW | CC B7 (358) | 2.0 TDI 136 PS |
| VW | Eos (1F7, 1F8) | 2.0 TDI 136 PS |
| VW | Golf VI (5K1) | 2.0 TDI 136 PS |
| VW | Passat B7 (362) | 2.0 TDI 136 PS |
| VW | Passat B7 Estate Van (365) | 2.0 TDI 136 PS |
| VW | Passat B7 Variant (365) | 2.0 TDI 136 PS |
| VW | Passat CC B6 (357) | 2.0 TDI 136 PS |
| VW | Sharan (7N1, 7N2) | 2.0 TDI 136 PS |
| VW | Tiguan (5N) | 2.0 TDI 4motion 136 PS |
Buy the kit for your model
- Audi A3, TT, Q3 and A1: seals only or seals and bolts
- VW Sharan and SEAT Alhambra: seals only or seals and bolts
- VW Passat B7 and Passat CC: seals only or seals and bolts
- VW Golf VI, Golf Plus, Jetta, Eos and Beetle: seals only or seals and bolts
- VW Tiguan, Touran and Scirocco: seals only or seals and bolts
Check these first
These engines share models, and often parts catalogue records, with CFFA but take different parts:
- AZV (Audi A3 and Audi A3 Sportback): three-letter codes are the older pumpe-duse engine. None of these parts fit.
- CBAA (Audi A3, Audi A3 Convertible, Audi A3 Sportback, VW Golf VI, VW Passat CC B6 and VW Tiguan) uses the earlier injectors held by tensioning plates, with no clamp bolt and a different return line seal (WHT007480A). It takes our plate-type seal kit instead.
If the part number on your injector is not 03L130277J or 03L130277Q, send us your registration and we will check it for you.
How to find your engine code
Look on the vehicle data sticker in the service book or in the spare wheel well, on the engine cover label, or ask any parts supplier with your registration. More help on our fitment help page, or see every engine code we cover on find your kit by engine code.
The same kit also fits
CFFB, CFGB, CFGC, CFHB, CFHC, CFHE, CFHF, CFJA, CGLA, CGLB, CGLC, CGLD, CGLE, CJCA, CJCB, CJCC, CJCD, CLCA, CLCB, CLLA, CMFA, CMFB, CMGA, CMGB. See each one on find your kit by engine code.
Not sure? Ask us
Send your registration or VIN through our contact form and we will confirm the right kit before you order. Free Royal Mail Tracked 24, sent the same working day if you order before 3pm.
Fitment checked against Volkswagen Group parts illustrations, October 2026. RIPSPEC parts are replacements for the VW part numbers shown.