Injector Seal Kit for Audi A4 B9, A4 Allroad B9 and A5 F5 3.0 TDI V6, 6 Injectors
Injector Seal Kit for Audi A4 B9, A4 Allroad B9 and A5 F5 3.0 TDI V6, 6 Injectors
A complete set of seals and washers for refitting all six injectors on the 3.0 V6 TDI common rail engine. Checked against VW Group parts data for each vehicle listed below, down to engine code.
What's in the kit
| Qty | Replaces | Part | Material |
|---|---|---|---|
| 6 | WHT000884 | Injector body O-ring | FKM (fluoroelastomer), black |
| 6 | 059130519B | Injector copper sealing washer, curved | Copper |
| 6 | WHT007480A | Return line O-ring (was 059130119) | FKM (fluoroelastomer), green |
18 pieces. Enough for all six injectors. Injector clamp bolts and plates are not included; refit your originals or see our seal and bolt kit. Not sure which 3.0 TDI you have? Message us your VIN or registration and we will check.
Fits these engine codes
Your engine code is on the sticker in the service book, on the V5C or on the engine itself.
For 3.0 TDI Piezo injectors 059130277 (CC, CD, CH, CK, CP, CT, EE, EH, EK, EM and others).
Vehicles this kit fits
Where a vehicle record also covers codes that take a different kit, they are shown in red.
| Model | Engine | hp | Built | Engine code |
|---|---|---|---|---|
| Audi A4 Allroad B9 (8WH, 8WJ) | 3.0 TDI quattro | 218 | 01/2016 to 08/2018 | CSWB |
| Audi A4 Allroad B9 (8WH, 8WJ) | 3.0 TDI quattro | 272 | 01/2016 to 08/2018 | CRTC |
| Audi A4 B9 (8W2, 8WC) | 3.0 TDI quattro | 272 | 05/2015 to 08/2018 | CRTC |
| Audi A4 B9 (8W2, 8WC) | 3.0 TDI | 218 | 09/2015 to 08/2018 | CSWB |
| Audi A4 B9 (8W2, 8WC) | 3.0 TDI quattro | 218 | 09/2015 to 08/2018 | CSWB |
| Audi A4 B9 Avant (8W5, 8WD) | 3.0 TDI quattro | 272 | 08/2015 to 08/2018 | CRTC |
| Audi A4 B9 Avant (8W5, 8WD) | 3.0 TDI | 218 | 10/2015 to 08/2018 | CSWB |
| Audi A4 B9 Avant (8W5, 8WD) | 3.0 TDI quattro | 218 | 11/2015 to 08/2018 | CSWB |
| Audi A5 (F53, F5P) | 3.0 TDI quattro | 218 | 07/2016 to 08/2018 | CSWB |
| Audi A5 (F53, F5P) | 3.0 TDI | 218 | 11/2016 to 08/2018 | CSWB |
| Audi A5 (F53, F5P) | 3.0 TDI quattro | 272 | 02/2017 to 12/2017 | CRTC |
| Audi A5 Cabriolet (F57, F5E) | 3.0 TDI quattro | 218 | 12/2016 to 08/2018 | CSWB |
| Audi A5 Cabriolet (F57, F5E) | 3.0 TDI | 218 | 03/2017 to 08/2018 | CSWB |
| Audi A5 Sportback (F5A, F5F) | 3.0 TDI quattro | 218 | 09/2016 on | CSWB |
| Audi A5 Sportback (F5A, F5F) | 3.0 TDI quattro | 272 | 02/2017 to 12/2017 | CRTC |
| Audi A5 Sportback (F5A, F5F) | 3.0 TDI | 218 | 03/2017 to 08/2018 | CSWB |
Please check before you buy
- Match your engine code to the list above. If it isn't listed, send us your VIN or registration and we'll check before you order.
- This kit is for the 3.0 V6 TDI with one clamp bolt per injector, built about 2011 on. The earlier 3.0 TDI with tensioning plates and nuts (codes CASA, CASB, CATA, CCMA, CCWA, CCWB) takes a flat washer: message us for that kit.
- Not for the VW Touareg 2014 on (it takes a flat washer, 05A130519), the Audi Q7 2015 on, or the 2018-on Audi 45 / 50 TDI and S4 / S5 TDI (codes DCPC, DCPE, DEWB), which use washer 059130519C. Send us your VIN and we will check.
- Six of everything: one set per injector.
About the parts
Every part is matched to the part it replaces and made to the specification of the original. Each kit is labelled with its part numbers and batch.
Questions
Message us with your registration or VIN and we'll confirm fitment before you buy.
RIPSPEC | RS-KIT-10020 | Vehicle manufacturer names and part numbers are used for reference only.