Injector Seal Kit 31375050 for Volvo V40, S60, V60, V70 and S80 1.6 T3 and T4 GTDi, 4 Injectors with Clips
Injector Seal Kit 31375050 for Volvo V40, S60, V60, V70 and S80 1.6 T3 and T4 GTDi, 4 Injectors with Clips
A complete set of clips and seals for refitting all four injectors on the 1.6 EcoBoost and the Volvo 1.6 GTDi petrol. Checked against Ford and Volvo parts data for each vehicle listed below, down to engine code.
What's in the kit
| Qty | Replaces | Part | Material |
|---|---|---|---|
| 4 | AG9G-9P847-AA | Injector retaining clip | Stainless steel 304 |
| 4 | 2223672 | Upper O-ring, 6.0 x 13.0 x 3.5 | FKM (fluoroelastomer) |
| 4 | kit CM5G-9U509-AA | Support washer, 6.6 x 12.0 x 2.0 | PA (nylon) |
| 4 | kit CM5G-9U509-AA | Combustion seal | PTFE, carbon-filled |
16 pieces: one clip, O-ring, support washer and combustion seal for each of the four injectors. Not sure which engine you have? Message us your VIN or registration and we will check.
Fits these engine codes
Your engine code is on the sticker in the service book, on the V5C or on the engine itself.
Replaces the parts in Ford injector seal kit CM5G-9U509-AA (Ford finis 1764075) and Volvo kit 31375050.
Vehicles this kit fits
Where a vehicle record also covers codes that take a different kit, they are shown in red.
| Model | Engine | hp | Built | Engine code |
|---|---|---|---|---|
| Volvo S60 II (134) | T3 | 150 | 04/2010 to 12/2015 | B4164T3 |
| Volvo S60 II (134) | T4 | 180 | 04/2010 to 12/2015 | B4164T |
| Volvo S60 II (134) | T4F | 180 | 04/2011 to 12/2015 | B4164T2 |
| Volvo S80 II (124) | T4 | 180 | 10/2010 to 04/2014 | B4164T |
| Volvo S80 II (124) | T4F | 180 | 05/2011 to 01/2014 | B4164T2 |
| Volvo V40 Cross Country (526) | T4 GTDi | 180 | 10/2012 to 12/2016 | B4164T |
| Volvo V40 Hatchback (525) | T3 GTDi | 150 | 03/2012 to 12/2016 | B4164T3 |
| Volvo V40 Hatchback (525) | T4 GTDi | 180 | 03/2012 to 12/2016 | B4164T |
| Volvo V40 Hatchback (525) | T2 GTDi | 120 | 04/2013 to 12/2016 | B4164T4 |
| Volvo V40 Hatchback (525) | T4 | 200 | 04/2014 to 12/2015 | B4164T |
| Volvo V60 I (155) | T3 | 150 | 09/2010 to 12/2015 | B4164T3 |
| Volvo V60 I (155) | T4 | 180 | 09/2010 to 12/2015 | B4164T |
| Volvo V60 I (155) | T4F | 180 | 04/2011 to 12/2015 | B4164T2 |
| Volvo V70 III (135) | T4 | 180 | 10/2010 to 12/2015 | B4164T |
| Volvo V70 III (135) | T4F | 180 | 01/2011 to 12/2015 | B4164T2 |
Please check before you buy
- Match your engine code to the list above. If it isn't listed, send us your VIN or registration and we'll check before you order.
- The PTFE combustion seal needs a seal installer and sizing tool to fit. It is not included.
- Not for the 1.5 EcoBoost, 2.0 EcoBoost, or the 1.0 EcoBoost in the Puma and Focus Mk4 (they use a different kit).
- Four of everything: one set per injector.
About the parts
Every part is matched to the part it replaces and made to the specification of the original. Each kit is labelled with its part numbers and batch.
Questions
Message us with your registration or VIN and we'll confirm fitment before you buy.
RIPSPEC | RS-KIT-10006 | Vehicle manufacturer names and part numbers are used for reference only.