Injector Seal and Bolt Kit for Audi Q5 and A6 C7 2.0 TDI
Injector Seal and Bolt Kit for Audi Q5 and A6 C7 2.0 TDI
A complete set of seals, washers and bolts for refitting all four injectors on the 2.0 TDI common rail engine (EA189). Checked against VW Group parts data for each vehicle listed below, down to engine code.
What's in the kit
| Qty | Replaces VW Group | Part | Material |
|---|---|---|---|
| 4 | WHT000884 | Injector body O-ring | FKM (fluoroelastomer), black |
| 4 | 059130519 | Injector copper sealing washer | Copper |
| 4 | WHT005302 | Return line O-ring | FKM (fluoroelastomer), black |
| 2 | WHT004739 | Injector clamp bolt, multipoint | Steel, M6 x 88 mm |
14 pieces. Enough for all four injectors. Injector clamps are not included; refit your originals. Only need the seals and washers? See the seal-only kit.
Fits these engine codes
Your engine code is on the sticker in the service book, on the spare wheel well label, or on the engine itself.
For injectors 03L130277J and 03L130277Q.
Vehicles this kit fits
| Model | Engine | hp | Built | Engine code |
|---|---|---|---|---|
| Q5 (8RB) | 2.0 TDI quattro | 136 | 08/2009 to 05/2017 | CJCB |
| Q5 (8RB) | 2.0 TDI | 136 | 11/2010 to 05/2017 | CJCB |
| Q5 (8RB) | 2.0 TDI quattro | 143 | 08/2009 to 05/2013 | CJCA |
| Q5 (8RB) | 2.0 TDI | 143 | 11/2010 to 05/2013 | CJCA |
| Q5 (8RB) | 2.0 TDI | 150 | 05/2013 to 05/2017 | CJCD |
| Q5 (8RB) | 2.0 TDI quattro | 150 | 05/2013 to 05/2017 | CJCD |
| Q5 (8RB) | 2.0 TDI quattro | 163 | 11/2008 to 05/2017 | CGLD |
| Q5 (8RB) | 2.0 TDI quattro | 177 | 06/2012 to 05/2017 | CGLC, CMGB |
| A6 C7 (4G2, 4GC) | 2.0 TDI | 136 | 01/2012 to 09/2018 | CGLE |
| A6 C7 (4G2, 4GC) | 2.0 TDI | 163 | 03/2011 to 09/2018 | CGLD |
| A6 C7 (4G2, 4GC) | 2.0 TDI | 177 | 03/2011 to 09/2018 | CGLC, CMGB |
| A6 C7 Avant (4G5, 4GD) | 2.0 TDI | 136 | 01/2012 to 09/2018 | CGLE |
| A6 C7 Avant (4G5, 4GD) | 2.0 TDI | 163 | 05/2011 to 09/2018 | CGLD |
| A6 C7 Avant (4G5, 4GD) | 2.0 TDI | 177 | 05/2011 to 09/2018 | CGLC, CMGB |
Please check before you buy
- Match your engine code to the list above. If it isn't listed, send us your VIN or registration and we'll check before you order.
- This kit is for the 2.0 TDI common rail engine, which has four-letter engine codes. It does not fit the older pumpe-duse 2.0 TDI (three-letter codes such as BKD, BKP, BMP).
- Other VW Group cars with the same engine have their own pages in our shop.
About the parts
Every part is matched to the VW Group part number it replaces. Seals are FKM (fluoroelastomer) and made to the specification of the VW Group originals. Everything is supplied as RIPSPEC parts.
Questions
Message us with your registration or VIN and we'll confirm fitment before you buy.
RIPSPEC | RS-KIT-10007 | Vehicle manufacturer names and part numbers are used for reference only.